01428 685902 Tracklink

MX100TP Triple Output Laboratory Power Supply

Ref: MX100TP

£1,095.00 £985.50 excl. VAT £1,182.60 inc. VAT
Only UK orders accepted

 

 
  • Three high performance outputs of 105 watts each
    3 x (0 to 35V at 0 to 3A)
  • Total power of 315 watts in a highly compact package
  • Range switching gives up to 70 volts and up to 6 amps
  • Twelve range combinations for maximum flexibility
  • Up to 210 watts from a single output
  • Low output noise and ripple via linear final regulation
  • High setting resolution of 1mV and 0.1mA (output 1)
  • Variable OVP and OCP trips on all outputs
  • 50 setting memories per output + 50 linked memories
  • Selectable voltage tracking (isolated tracking)
  • Selectable current meter averaging
  • Switchable remote sense on all outputs
  • Graphic LCD provides simultaneous output metering
  • Numeric or spin-wheel control of all parameters
  • Individual or combined output on/off control with
    programmable delay sequencing.
  • Front panel locking with optional pass-code protection
  • 3U half-rack case for bench or rack mounting
  • GPIB, RS-232, USB and LAN (LXI) interfaces (MX100TP)
    Three full-performance outputs - 3 x 105 watts
     

    The MX100T differs from most other triple output power supplies in having three outputs of equal power, each with the ability to provide 0 to 35V at 0 to 3A.

    Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch.

    Mixed-mode regulation

    To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design.

    Excellent line and load regulation is matched by low noise and good transient response.

    Range switching and power control

    To increase its ability to match a variety of applications, each output has more than one range.

    Outputs one and two can provide 16V/6A as an alternative to 35V/3A, while output three can provide 70V/1.5A.

    When higher power is required, outputs two and three can be combined internally to provide up to 210 watts as either 35V/6A or 70V/3A from a single output.

    Remote control for system applications

    The MX100TP incorporates USB, RS232, GPIB and LXI compliant LAN interfaces.

    These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.

    Duplicate power and sense terminals are incorporated at the rear.

    The compact half-rack 3U size uses  front input ventilation which enables vertical and horizontal stacking without the need for additional ventilation space.


Please see pdf for full specification.

Our
Accreditations

Our
News