01428 685902 Tracklink

PLH250P(G) - High Voltage DC Bench Power Supply with GPIB

Ref: PLH250P

£743.00 £668.70 excl. VAT £802.44 inc. VAT
Only UK orders accepted

The PLH-P series includes all of the manual control features of the PLH series, but adds comprehensive remote control facilities.

Bench/System Higher Voltage DC Power Supply, Linear Regulation 250V/0.375A, Isolated Analog, USB, RS232, LAN & GPIB Interfaces.

Power output terminals are duplicated on the rear panel for rack mount applications or other situations where rear connection is more appropriate.

To meet the varying needs of today’s engineers, a comprehensive array of interfaces is provided. RS-232, USB and LAN (Ethernet) with LXI support are provided as standard. An additional GPIB interface is also optionally available.
Each of the digital bus interfaces provides full control of voltage, current, and output on/off, plus read-back of voltage, current and status. The interfaces are at ground potential and are opto-isolated from the output terminals.

Voltage Setting:

Setting Resolution: 10mV
Setting Accuracy: ± (0.05% +50mV)

Current Setting:

Setting Resolution: 0.1mA (0.01mA on 75mA range)
Setting Accuracy: ± (0.3% +0.1mA); ± (0.3% +0.01mA) on 75mA range

Programming Speed:

Command Delay: Typically <25ms (this must be added to any of the figures below)
Voltage Up Time: Typically <45ms* to 1%
Voltage Down Time: Typically <200ms* to 1% (full load); typically <500ms* to 1% (no load)
* The up and down times vary with model, current range and voltage step size. More information is contained in the PDF.

Voltage Readback:

Resolution: 10mV
Accuracy: ± (0.1% +50mV)

Current Readback:

Resolution: 0.1mA (0.01mA on 75mA range)
Accuracy: ± (0.3% +0.1mA); ± (0.3% +0.01mA) on 75mA range

Our
Accreditations

Our
News