For the temperature calibration professional that wants a highly accurate, easy-to-use, single function RTD temperature calibrator the Fluke 712B is the ideal test tool.
General Specifications | |
Maximum voltage applied between any terminal and earth ground or between any two terminals | 30 V |
Operating temperature | -10 °C to 50 °C |
Storage temperature | - 30 °C to 60 °C |
Operating altitude | 2,000 meters |
Storage altitude | 12,000 meters |
Relative humidity (% RH operating without condensation) | Non condensing |
90% (10 °C to 30 °C) | |
75% (30 °C to 40 °C) | |
45% (40 °C to 50 °C) | |
(Without condensation) | |
Vibration requirements | MIL-T-28800E, Class 2 |
Drop text requirements | 1 meter |
IP Rating | IEC 60529: IP52 |
Electromagnetic environment | IEC 61326-1, Portable |
Safety | IEC 61010-1, Max 30 V to earth, Pollution Degree 2 |
Power supply | 4 AA NEDA 1.5A IEC LR6 batteries |
Size (H x W x L) | 52.5 mm x 84 mm x 188.5 mm |
Weight | 515 g |
DC mA Measurement | |
Resolution | 0-24 mA |
Range | 0.001 mA |
Accuracy (% of reading + counts) | 0.010% + 2 μA |
Temperature coefficient | ± (0.002% of reading + 0.002% of range) /°C ( <18 °C or >28 °C) |
Ohms Measurement | |
Ohms range | Accuracy (% of reading +counts) |
0.00 Ω to 400.00 Ω | 0.015% + 0.05 Ω |
400.0 Ω to 4000.0 Ω | 0.015% + 0.5 Ω |
Note: Read accuracy is based on 4-wire input. For 3-wire ohm measurements, assuming all three leads are matched, add 0.05 Ω (0.00 Ω~400.00 Ω), 0.2 Ω (400.0 Ω~4000.0 Ω) to the specifications. | |
Temperature coefficient | ± (0.002% of reading + 0.002% of range) /°C ( <18 °C or >28 °C) |
Ohms Source | ||
Ohms range | 1.0 Ω to 400.0 Ω | |
1.00 Ω to 400.00 Ω | ||
400.0 Ω to 1500.0 Ω | ||
1500.0 Ω to 4000.0 Ω | ||
Excitation current from measurement device | 0.1 mA to 0.5 mA | |
0.5 mA to 3 mA | ||
0.05 mA to 0.8 mA | ||
0.05 mA to 0.4 mA | ||
Accuracy (% of reading + counts) | 0.015% + 0.1 Ω | |
0.015% + 0.05 Ω | ||
0.015% + 0.5 Ω | ||
0.015% + 0.5 Ω | ||
Resolution | 0.00 Ω to 400.00 Ω | 0.01 Ω |
400.0 Ω to 4000.0 Ω | 0.1 Ω | |
Temperature coefficient | ± (0.002% of reading + 0.002% of range) /°C ( <18 °C or >28 °C) Supports pulsed transmitters and PLCs with pulse times as short as 5 ms |
RTD Input and Output | |||||||
RTD Type (α) | Range (°C) | Measure (°C) | Source (°C) | ||||
1-year | 2-year | Source current | 1-year | 2-year | |||
10Ω Pt(385) | -200 to 100 °C | 1.5 °C | 3 °C | 1 mA | 1.5 °C | 3 °C | |
100 to 800 °C | 1.8 °C | 3.6 °C | 1 mA | 1.8 °C | 3.6 °C | ||
50Ω Pt(385) | -200 to 100 °C | 0.4 °C | 0.7 °C | 1 mA | 0.4 °C | 0.7 °C | |
100 to 800 °C | 0.5 °C | 0.8 °C | 1 mA | 0.5 °C | 0.8 °C | ||
100 Ω Pt(385) | -200 to 100 °C | 0.2 °C | 0.4 °C | 1 mA | 0.2 °C | 0.4 °C | |
100 to 800 °C | 0.015% +0.18 °C |
0.03% +0.36 °C |
0.015% +0.18 °C |
0.03% +0.36 °C | |||
200 Ω Pt(385) | -200 to 100 °C | 0.2 °C | 0.4 °C | 500 μA | 0.2 °C | 0.4 °C | |
100 to 630 °C | 0.015% +0.18 °C |
0.03% +0.36 °C |
0.015% +0.18 °C |
0.03% +0.36 °C | |||
500 Ω Pt(385) | -200 to 100 °C | 0.3 °C | 0.6 °C | 250 μA | 0.3 °C | 0.6 °C | |
100 to 630 °C | 0.015% +0.28 °C |
0.03% +0.56 °C |
0.015% +0.28 °C |
0.03% +0.56 °C | |||
1000 Ω Pt(385) | -200 to 100 °C | 0.2 °C | 0.4 °C | 250 μA | 0.2 °C | 0.4 °C | |
100 to 630 °C | 0.015% +0.18 °C |
0.03% +0.36 °C |
0.015% +0.18 °C |
0.03% +0.36 °C | |||
100 Ω Pt(3916) | -200 to 100 °C | 0.2 °C | 0.4 °C | 1 mA | 0.2 °C | 0.4 °C | |
100 to 630 °C | 0.015% +0.18 °C |
0.03% +0.36 °C |
0.015% +0.18 °C |
0.03% +0.36 °C | |||
100 Ω Pt(3926) | -200 to 100 °C | 0.2 °C | 0.4 °C | 1 mA | 0.2 °C | 0.4 °C | |
100 to 630 °C | 0.015 % +0.18 °C |
0.03% +0.36 °C |
0.015% +0.18 °C |
0.03% +0.36 °C | |||
10 Ω Cu(427) | -100 to 260 °C | 1.5 °C | 3 °C | 1 mA | 1.5 °C | 3 °C | |
120 Ω Ni(672) | -80 to 260 °C | 0.15 °C | 0.3 °C | 1 mA | 0.15 °C | 0.3 °C | |
50 Ω Cu(427) | -180 to 200 °C | 0.4 °C | 0.7 °C | 1 mA | 0.4 °C | 0.7 °C | |
100 Ω Cu(427) | -180 to 200 °C | 0.2 °C | 0.4 °C | 1 mA | 0.2 °C | 0.4 °C | |
YSI400 | 15 to 50 °C | 0.2 °C | 0.4 °C | 250 μA | 0.2 °C | 0.4 °C | |
1. Sensor inaccuracies not included. 2. Resolution: 0.1 °C. 3. Read accuracy is based on 4-wire input. For 3-wire RTD measurements, assuming all three RTD leads are matched, add 1.0 °C (Pt10 and Cu10), 0.6 °C (Pt50 and Cu50), 0.4 °C (Other RTD types) to the specifications. 4. Source Accuracy in source mode is based on 0.5 mA~3 mA (1.00 Ω~400.00 Ω), 0.05 mA~0.8 mA (400.0 Ω~1500.0 Ω), 0.05 mA~0.4 mA (1500.0 Ω ~4000.0 Ω), excitation current (0.25 mA for Pt1000 range). 5. Temperature Coefficient: ±0.05 °C /°C for measure, ± 0.05 °C /°C (<18 °C or >28 °C) for source. 6. Supports pulsed transmitters and PLCs with pulse times as short as 5 ms. |
03 April 2017
In this post we’ve given you an indepth look at the exclusive new Fluke thermal multimeter (Fluke 279 FC and Fluke 279 FC/iFlex TRMS)
read more
03 April 2017
Ti21 EBI Digital Frequency Selective Meter, catalogue No. URLT/011362.
read more
03 May 2016
Our latest brand highlights post features Amprobe, one of the world’s leading manufacturers of electrical test tools. Read more here.
read more
26 April 2016
In this post Tracklink shares insights on Multi Function Testers (MFTs) – with some tips on the best products and what to look out for before you buy a Multi Function Tester.
read more
04 April 2016
In our second brand insights post, we have highlighted some of the best insulation testing tools by world-renowned manufacturer Megger. We’ve also given you some insight into Megger best selling products with tips from our expert technicians. Read more here
read more
24 March 2016
Insulation testers are vital to maintaining high standards of testing and maintenance. In this post Tracklink will give you an insight into the top considerations before you purchase your next insulation resistance tester. We’ll also share some top tips a
read more
25 February 2016
As one of the leading suppliers of Thermal Imagers in the UK, Tracklink prides itself on sharing its knowledge to make sure you get the best quality products that are suited to your needs. In this helpful article, we have shared some of our expertise
read more
25 February 2016
Fluke is a highly regarded brand in the professional world and for good reason. Whether you’re looking for Multimeters, Clamp Meters or Insulation Testers, Fluke is guaranteed to have a product that’s a perfect fit for your business’ needs.
read more
21 January 2013
Tracklink once again invest in more Calibration equipment. The new equipment will allow Tracklink to cover a broader range of instruments and it gives us better uncertainties which allows us to provide you, the customer, a wider band of results.
read more
21 January 2013
Tracklink are proud to announce the award of a 12 month Supply contract to the Railway Industry. This encompasses the Supply of Test Instruments, Calibration and Hand Tools together with Rail Specific equipment.
read more