Your cart is empty
0 items
Go to basket
Torque wrench TORCOFIX Z 16, 5-50 Nm
Ref: 1646176
£82.53 £84.80 excl. VAT £101.76 inc. VAT
Use:
Controlled screw tightening in the most widely used range of 2 - 750 N·m / 1.5 - 550 lbf·ft
For use in almost all industrial manufacturing areas Features:
Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate. Working accuracy: +/- 3% tolerance of scale set torque. The specification of the standard (+/- 4%) is exceeded.
Adjustable torque wrench with spigot end
For controlled bi-directional tightening
With certificate acc. to DIN EN ISO 6789, traceable via in-house DKD laboratory to national standards
Release system triggers a tactile and audible signal
Sturdy, satin chrome-plated tubular steel design and high-quality plastic parts
Dual scale N·m and lbf·ft below a window with a magnifying-glass effect
Magnifying glass with marking for minimum paralaxe errors allows a high degree of safety when setting the requisite torque value
Additional micrometre scale for setting interim values
Ergonomically shaped black plastic handgrip
With an indentation in the middle of the handgrip as a calibration aid
Factory depth gauges: 32 mm (16) or 56 mm (22)
Operation only with end fittings with standardised depth gauges, otherise inaccuracies can arise
Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket)
Controlled screw tightening in the most widely used range of 2 - 750 N·m / 1.5 - 550 lbf·ft
For use in almost all industrial manufacturing areas Features:
Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate. Working accuracy: +/- 3% tolerance of scale set torque. The specification of the standard (+/- 4%) is exceeded.
Adjustable torque wrench with spigot end
For controlled bi-directional tightening
With certificate acc. to DIN EN ISO 6789, traceable via in-house DKD laboratory to national standards
Release system triggers a tactile and audible signal
Sturdy, satin chrome-plated tubular steel design and high-quality plastic parts
Dual scale N·m and lbf·ft below a window with a magnifying-glass effect
Magnifying glass with marking for minimum paralaxe errors allows a high degree of safety when setting the requisite torque value
Additional micrometre scale for setting interim values
Ergonomically shaped black plastic handgrip
With an indentation in the middle of the handgrip as a calibration aid
Factory depth gauges: 32 mm (16) or 56 mm (22)
Operation only with end fittings with standardised depth gauges, otherise inaccuracies can arise
Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket)